November 2019
Brand = Flair S1
Manufacturer = Flair S1
Model = Flair S1
Model = Flair S1
CPU Abi = armeabi-v7a
Mediatek platform = MT6572
Android release = 4.4.2
Firmware version = LAVA_Flair_S1_INT_S106_20160104
Firmware date = 2016年 01月 04日 星期一 20:57:25 CST

EMMC CID:
EMMC CSD: D04F01320F5903FFFFFFFFEF8A400061
EMMC NAME: V10008 , Vendor: KINGSTONE , S/N: 01B999E6 , rev. 50
EMMC NAME (HEX): 563130303038

EMMC ROM 1 (Main User Data) Capacity: 7216 MB (0001C3000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)

Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)

Boot from: ROM2 (Boot partition 1) , width: 1 bit
Boot Partition [179] / Bus Config [177] : 0x48 / 0x00
H/W Reset Function [162] : 0x01 , RST_n signal is permanently enabled

Partition setting [PARTITION_SETTING_COMPLETE] : 0x00





Brand = samsung
Manufacturer = samsung
Model = j2corelte
Model = SM-J260F
CPU Abi = armeabi-v7a
Android release = 8.1.0
Firmware version = M1AJB.J260FXXU3ASF1
Firmware date = Mon Jun  3 18:31:32 KST 2019

EMMC CID: 150100464E36324D4200740FC6F016C1
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC NAME: FN62MB , Vendor: SAMSUNG , S/N: 740FC6F0 , rev. 00
EMMC NAME (HEX): 464E36324D42

EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)

Extended CSD rev: 1.8 (MMC 5.1)

Boot from: ROM2 (Boot partition 1) , width: 4 bit
Boot Partition [179] / Bus Config [177] : 0x48 / 0x01
H/W Reset Function [162] : 0x00 , RST_n signal is temporarily disabled

Partition setting [PARTITION_SETTING_COMPLETE] : 0x00

CALL 01822171746


Symphony V75 DUMP FILE 1000% TESTED BY EASY JTAG

Brand = Symphony
Manufacturer = Symphony
Model = V75
Model = V75
Phone platform = mt6580
CPU Abi = armeabi-v7a
Mediatek platform = MT6580
Android release = 6.0
Firmware version = MRA58K release-keys
Firmware date = Thu Nov  2 12:50:13 CST 2017


PAID 01822171746

HOTWAVE R8 PLUS 1000% TESTED FLASH FILE

FLASH WITH CM2


# 1. Download Flash File From The Link below
# 2. And Extract The Stock Or Firmware On Your Computer
# 3. After Extracting You Will Find The
# 4. Install the USB Drivers Skip If Drivers Are Already Installed.
# 5. Run The Existing Flash Tools (Run As Administrator)
# 6. Load The File From The Firmware Folder On Your Computer (Where  The file extract You)
# 7. Using flash tools Connect Your Smartphone To The Computer Using The USB Driver
# 8.Click on Upgrade / Download/Start  Button In The Tools
    Flash Tool To Begin The Flashing
# 9. Green Ring Will Appear At The End Of Successful Flash Done
# 10. After Successfully Flash You May Hard or Soft Reset The Phone.


# Important Notes ! Take A Backup Of Your Personal Data Before Flashing Or Installing The Firmware On Your
Smartphone. That is very Important.  As This Helps You To Recovery The Personal Data Whenever AnyThing Wrong
Happens To your Smartphone.

call 01822171746

                                           
Tecno B2 Dump File by easy jtag plus

EMMC CID: 150
EMMC CSD: D02
EMMC NAME: FE62MB , Vendor: SAMSUNG , S/N: C487AA82 , rev. 03
EMMC NAME (HEX): 464536324D42

EMMC ROM 1 (Main User Data) Capacity: MB (0003A3E00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity:  (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity:  KB (000000400000)

Extended CSD rev: 1.8 (MMC 5.1)

Boot from: ROM2 (Boot partition 1) , width: 1 bit
Boot Partition [179] / Bus Config [177] : 0x48 / 0x00
H/W Reset Function [162] : 0x01 , RST_n signal is permanently enabled

Partition setting [PARTITION_SETTING_COMPLETE] : 0x00


PAID FILE 01822171746





https://fmobilefeni.blogspot.

Samsung M115F U3 Dead Boot Repair By USB Without JTAG Box

 Samsung M115F U3 Dead Boot Repair By USB Without JTAG Box                                           Hello Dear Visitor..                   ...